- Sony ExViewHAD Progressive Scan CCD
- Built-in 2.7-9 mm varifocal megapixel auto iris lens
- Up to SXGA (1280х960) resolution at 12.5 fps
- Up to 0.02 Lux minimum scene illumination at F1.2, 50 IRE, Slow Shutter
- Frame integration mode
- MPEG-4/MJPEG compression
- Backlight compensation
- Built-in hardware motion detection
- Alarm input/output
- Two-way audio
- Recording to SD card
- 3-axis camera mount
- Power supply: 12 VDC/24 VAC/PoE
- Service monitor output
The STC-IPM3595A camera features Sony ExViewHAD Progressive Scan megapixel CCD, providing substantial improvement of several characteristics, including minimum scene illumination, signal to noise ratio and color rendering. SXGA image resolution allows the camera to operate on the applications where image detail is critical, while electronic zoom feature serves for visual enlargement of certain image areas.
Day-and-Night Surveillance
Software Day/Night feature ensures STC-IPM3595A’s operation in various lighting conditions. All cameras in the series support manual setup of illumination threshold (3 levels) for automatic camera switching from color to B/W mode. To avoid spontaneous switching between day and night operation modes, the STC-IPM3595A allows the operator to set 5, 10, 15, or 30 sec. switching delay. To improve video quality in extremely low light environment, Slow Shutter mode is offered, when the camera automatically selects frame integration factor to maximum of 4 seconds.
3-axis mount and megapixel auto iris lens
The IP camera module has a 3-axis mount, which allows to install the camera on any horizontal or vertical surface without additional brackets. Built-in 2.7-9 mm varifocal megapixel auto iris lens provides 30° to 101° horizontal angle of view and allows the operator to install the camera at various distances from the monitored area.
Simultaneous MPEG-4 or M-JPEG Video Streaming
The STC-IPM3595A supports simultaneous transmission of two MJPEG and MPEG4 video streams. In MJPEG compression mode all camera resolutions are supported, including megapixel SXGA (at 12.5 fps), with adjustable video compression ratio. MPEG4 allows the camera to use VGA or QVGA resolution and frame rate of up to 25 fps.
Camera Response to Motion or External Sensor Alarm
The built-in motion detection has three sensitivity levels, with detection area configurable using 8х6 grid. When motion detection or alarm sensor is activated, IP camera can trigger video recording to remote server or SD card, enable alarm device, send event notification with alarm frames attached to specified email addresses or FTP server.
Video Recording to SD Cards
SD memory card slot allows the camera to record up to 2 GB of information directly from the camera without use of any accessories. The card can be used for event, pre-alarm and post-alarm frames recording. The IP camera allows the operator to set up card overwrite mode as well as enable backup in case of FTP server fail.
Hybrid Power Supply and Two-way Audio
The STC-IPM3595A camera allows the operator to select any of three power supply types: 12 VDC, 24 VAC, or PoE technology. Since each STC-IPM3595A is equipped with audio input and output, full duplex monophonic audio connection with the controlled area can be easily arranged.
IP Video Viewing and System Administration
Since the STC-IPM3595A is equipped with a built-in web server, you can view camera video on any network PC in a standard web browser window. To build IP video surveillance systems, NetStation video management software is recommended, which allows the camera to perform remote video surveillance and supports eMaps, multichannel video recording, search and playback, as well as PTZ control.
Specifications of the Smartec STC-IPM3595A megapixel dome camera
|
Model:
|
STC-IPM3595A/1
|
|
Camera Type:
|
Software Day/Night
|
|
Image Sensor:
|
1/3” Sony ExViewHAD Progressive Scan CCD
|
|
Picture Elements:
|
1280(H) х 960(V)
|
|
Compression:
|
MPEG-4/MJPEG
|
|
Resolution:
|
SXGA (1280х960) at 10-15 fps
VGA (640х480) at 25 fps
QVGA (320х240) at 25 fps
|
|
Minimum Scene Illumination:
|
0.4 Lux (F1.2, 50 IRE)
0.02 Lux (F1.2, 50 IRE, 4 sec. frame integration)
|
|
Lens:
|
2.7-9 mm megapixel auto iris
|
|
Horizontal Angle of View:
|
30°-101°
|
|
Electronic Shutter:
|
1/25-1/10000 sec. or Auto; Slow Shutter (up to 4 sec.) supported
|
|
Backlight Compensation:
|
Zone (1-6) / Auto / Off
|
|
White Balance:
|
2500K-10000K
|
|
AGC:
|
Low/Medium/High
|
|
Synchronization:
|
Internal
|
|
Audio:
|
Two-way mono audio transmission / Full Duplex
|
|
Audio Input/Output:
|
Line input: 1.4 V, 3.5 mm jack
|
|
Motion Detection:
|
8х6 grid, 3 sensitivity levels
|
|
Alarm Input/Output:
|
1xIN (NO/NC), 1xOUT
|
|
SD Card Slot:
|
Up to 2 GB SD memory cards supported
|
|
SD Card:
|
2 GB supplied
|
|
Network Connection:
|
Ethernet 10/100Base-T, RJ-45
|
|
Web Browser:
|
Internet Explorer 6.0 or higher
|
|
Network Protocols:
|
TCP/IP, UDP/IP, HTTP, SMTP, DNS, DHCP, NTP, FTP, RTP
|
|
Operating Temperature:
|
-10° to +50°С, humidity up to 80%
|
|
Input Voltage:
|
12 VDC / 24 VAC
PoE (IEEE 802.3af), Class 3
|
|
Power Consumption:
|
< 8 W
|
|
Dimensions:
|
140mm (D) х 130mm (H)
|
|
Weight:
|
430 g
|
|
