- 1/2.5” CMOS image sensor
- 1280х720 resolution at 30 fps
- MPEG-4/MJPEG compression
- 0.5 Lux (F1.2, IRE 50) minimum scene illumination
- Software Day/Night mode
- Three individually configured video streams
- Two-way audio
- Alarm I/O
- MicroSD memory card supported
- Analog video output for camera setup
- RS-485 control interface
- Power supply: 12 VDC / 24 VAC / PoE
Multipurpose STC-IPM3091A IP camera features 1/2.5” megapixel progressive scan CMOS sensor, which generates up to 1280x720 pixel video. Both manual and Auto iris megapixel lenses are recommended for use with the camera. Software Day/Night mode allows the camera to operate in low light environment.
Simultaneous Transmission of 3 Video Streams
The STC-IPM3091A supports simultaneous transmission of three video streams in MPEG4 (2 streams) and MJPEG (1 stream) compression modes. Resolution, compression and frame rate are configurable per individual stream.
MJPEG offers a selection of three video compression levels, while MPEG-4 allow the camera to adjust bit rate within 500 kbps – 8000 kbps, and frame rate.
Video Recording to Memory Cards
MicroSD memory card slot allows the camera to record video even in case of communication interruption. Memory card recording mode guarantees retention of video recorded during communication interruption and allows its remote viewing after network recovery.
Alarm Response
The STC-IPM3091А is equipped with alarm I/O used to connect alarm sensor/external device. It also uses hardware motion detection allowing to configure up to 12 detection zones. For two-way audio communication, the IP camera features audio input/output, providing connection for external microphone / speaker.
Power Supply Options
The STC-IPM3091A IP camera allows the camera to select any of supported power supply options 12 VDC, 24 VAC, or PoE.
Centralized Monitoring & Recording Software
To implement IP video surveillance systems of any scale with Smartec video cameras, we recommend to use NetStation software. The software offers multiple features for viewing and recording video, allows the camera to create interactive eMap graphic plans and perform smart search of archived video.
All camera settings are accessible via direct connection to MS Internet Explorer after authorization.
Specifications of the Smartec STC-IPM3091A Day/Night megapixel camera
|
Model:
|
STC-IPM3091A/3
|
|
Camera Type:
|
Megapixel IP Camera
|
|
Image Sensor:
|
1/2.5” CMOS Sensor
|
|
Picture Elements:
|
2592(H) х1944(V), progressive scan
|
|
Resolution:
|
HD 720p (1280x720), VGA (640 X 480), 352 (640 X 352),192 (352 X 192)
|
|
Software Day/Night Mode:
|
Yes
|
|
Minimum Scene Illumination:
|
0.5 Lux (F1.2 IRE50)
|
|
Compression:
|
MPEG-4x2 / MJPEG
|
|
Frame Rate:
|
30 fps at any resolution
|
|
Video Streaming:
|
3 streams with adjustable codec / resolution / frame rate
|
|
Motion Detection:
|
hardware, 12 detection zones
|
|
Alarm Input/Output:
|
1xIN, 1xOUT
|
|
Memory Card Slot:
|
microSD (up to 32 GB)
|
|
Audio Input/Output:
|
1xIN, 1xOUT
|
|
Network Protocols:
|
TCP/IP, UDP, HTTP, SMTP, DNS, DHCP, NTP, DDNS, FTP, RTP, RTSP over TCP or UDP, ICMP, IGMP, UPNP
|
|
Electronic Shutter:
|
1/25-1/10000 sec. or Auto; Slow Shutter (up to 4 sec.) supported
|
|
Lens Mount:
|
CS
|
|
Input Voltage:
|
12 VDC / 24 VAC / PoE
|
|
Power Consumption:
|
5 W
|
|
Operating Temperature:
|
-10° to +50°С
|
|
Dimensions:
|
114х66х65mm
|
|
Weight:
|
320 g
|
Accessories
|
STB-C01
|
Wall/ceiling camera bracket; aluminium; 175 mm
|
|
STB-CO2
|
Wall/ceiling mount bracket; aluminium; cable feedthrough; 170 mm
|
|
STL-MP2812DC
|
1.3 Mpix lens, 2.8-12 mm, 102°-24°, F1.3-360, aspherical, Direct Drive auto iris, IR Correction, Scale, MM, CS
|
|
