eng | rus Site map
About Smartec | News | Documentation | FAQ | Where to buy
The Art of CCTV
For example, ip camera  
Where to buy
E-mail: info@smartec-security.eu

Catalog

Color Pixim WDR Camera Smartec STC-2008

pixim camera STC-2008
  • 1/3” WDR PIXIM® image sensor
  • Wide dynamic range (maximum 120 dB)
  • High resolution 520 TVL
  • OSD menu
  • DC/Video Drive auto iris control
  • Backlight compensation
  • Auto white balance
  • Compact casing
  • Made in Japan

PIXIM® wide dynamic range
The camera uses WDR image sensor utilizing PIXIM technology. Signal from each pixel of the image sensor is captured and converted into a digital value independently, providing considerable enhancement of the camera’s dynamic range. 

Thanks to multisampling and digital video signal processing the camera provides complete compensation of image degradation caused by direct sunlight, change of lighting conditions or backlight, as well as color distortion in faint or extremely bright light.

Unlike previous versions of PIXIM sensors, the ORCA-D2500 which is utilized in the STC-2008, along with wide dynamic range also provides high signal to noise ratio (50 dB). This allows to use the camera not only in well-illuminated locations but also in average illumination environment.

Frame integration mode
The Slow Shutter feature serves to switch the camera into low shutter speed mode. This might be useful if you need to observe static objects in low-light environment (<1 Lux).

High quality surveillance in difficult lighting conditions
The STC-2008 cameras are designed for use in video surveillance systems on sites with uneven or changeable lighting.  The cameras are recommended for installation in lobbies, at the entrances to underground parking, in casinos, to view people against a bright background, or under other difficult lighting conditions.

Compact design
Due to its compact casing [86.5 mm (L) x 42 mm (W) x 42 mm (H)], the STC-2008 will easily fit into any weather-proof enclosure, if outdoor installation is required.

Easy setup
The STC-2008 color camera can be set up through the OSD menu, which allows you to select the required camera settings: WDR mode, brightness setting, automatic gain control, backlight compensation, Slow Shutter, etc.

Specifications 

Model:

STC-2008/1

Camera Type:

Color

Video Output

BNC, 1 Vp-p, 75 ohms/S-Video

Image Sensor:

1/3” WDR PIXIM® ORCA-D2500

Picture Elements:

720 (H) x 540 (V)

Resolution:

520 TVL

Minimum scene illumination:

1 Lux/F1.4; 0.03 Lux/F1.4 (frame integration mode)

Signal to Noise Ratio:

50 dB (AGC OFF)

Auto Iris Control:

DC / Video drive

Backlight Compensation:

ON/OFF

AGC:

ON/OFF

White Balance:

AWB/fixed modes

Lens Mount:

CS

Input Voltage:

12 VDC

Power Consumption:

2 W

Operating Temperature

-10° to 50°C, < 96%, noncondensing

Dimensions:

86.5 mm (L) x 42 mm (W) x 42 mm (H)

Weight:

300 g

 

Accessories 

STB-C02

Wall/ceiling mount bracket; aluminium; cable feedthrough; 170 mm

Copyright Smartec 2006-2012