
- 1/3” Sony 960H EXview HAD CCD II
- Sony Effio-E Processor
- 680/700 TVL resolution
- 0.1/0.08 Lux (F 1.2) resolution
- Super wide dynamic range: х128 WDR (52 dB)
- Built-in 2.8-10.5 mm varifocal lens
- 2D Digital Noise Reduction (DNR)
- Ceiling or wall mount (3-axis camera mounting)
- 12VDC voltage
STC-3511 supports Day/Night software mode and 2D DNR noise reduction technology, allowing color security camera to generate highly-detailed images in low light conditions. 2D DNR technology uses pixel noise removal algorithm, which adjusts the noise, appearing on color images and improves overall video quality, ensuring effective DVR free disk space usage.
Ultra-high resolution and superior clarity STC-3511 uses Sony 960H EXview HAD II CCD and Sony Effio-E digital signal processor, due to which color security camera provides high image clarity and superior color rendering. Horizontal resolution of the image is 680 TVL in Color and 700 TVL in B/W mode, while minimum scene illumination of this camera reaches 0.1/0.08 lux in Day/Night modes.
Operation in contrast light conditions Extended dynamic range (52 dB) allows STC-3511 to generate balanced color images with good detail rate. Even in short-term changes in light conditions, color security camera transmits clear images both of bright and dark areas of security application. To eliminate the spontaneous switching between Color and B/W modes, this security model uses "Anti-headlight" function, providing switching delay time up to 255 seconds.
Easy installation and configuration Unlike many analogues, this security model uses multi-lingual system of on-screen OSD-menus to adjust its operating modes. It can be accessed through navigation buttons located on the camera module. In addition, color security camera has a decorative dome enclosure and 3-axis camera mounting brackets, which allow the operator to adjust viewing direction and install STC-3511 on any vertical and horizontal surfaces without special brackets. Moreover, this color camera is available in two versions with black and white colors of the housing.
Highly customizable image quality STC-3511 has 4 automatic gain control (AGC) modes, gamma correction function and high resistance to the backlight illumination, and also allows the operator to adjust the electronic shutter modes and additional options to configure security camera: image contrast, color saturation and sharpness. Due to this range of settings, each color security camera can generate video with the natural hues, intensity and color purity, allowing this model to operate on the applications with strict requirements on image quality.
Motion detection and privacy zone masking STC-3511 hardware motion detector responds to motion in the security area and allows the operator to select up to 384 (24x16) detection zones in the frame. Due to the high level of detector’s sensitivity Smartec color security camera can detect even a slight movement. At the same time it allows the operator to set masking zones (8) and configure private zones formation, size, color and transparency.
Specifications of the Smartec STC-3511 color security camera
|
Model:
|
STC-3511/1W
|
STC-3511/1B
|
|
Camera Type:
|
Easy Day/Night WDR
|
|
Image Sensor:
|
1/3" Sony 960H EXview HAD CCD II
|
|
Picture Elements:
|
1024 (H) x 596 (V)
|
|
Resolution:
|
680/ 700 TVL
|
|
Minimum Scene Illumination:
|
0.1 Lux (Color) / 0.08 Lux (B/W), F1.2
|
|
Digital Signal Processing:
|
DSP Sony Effio-E
|
|
S/N ratio:
|
> 52 dB (AGC OFF)
|
|
Electronic Shutter:
|
AUTO (1/50 ~1/100,000sec.) / MANUAL: 1/50, FL 1/120, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000 sec.
|
|
WDR:
|
х128 (52 dB)
|
|
Back Light Compensation:
|
HLC / BLC / OFF
|
|
AGC:
|
4 auto modes
|
|
White Balance:
|
ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK
|
|
Gamma Compensation:
|
0.45
|
|
Day/Night Mode (Software):
|
AUTO (selectable switching threshold)/ COLOR / B&W
|
|
Lens:
|
aspherical, 2.8-10.5 mm, F1.2, DC auto iris
|
|
Angle of View:
|
99.5°-27.4° (horizontal)
|
|
Synchronization System:
|
Internal
|
|
Video Output:
|
1.0Vp-p, 75Ω (BNC)
|
|
Input Voltage:
|
12 VDC +/- 10%
|
|
Power Consumption:
|
1.5 W
|
|
Operating Temperature
|
-10° to 50°C, 85%, noncondensing
|
|
Dimensions:
|
D118 x 88 mm
|
|
Weight:
|
320 g
|
Accessories
|
STB-C2O1
|
Wall mount bracket
|
|